 |
|
Materials Needed:
Time to complete this project: Approximately 20 minutes |
 |
| Step #1 Wrap wire around bottom of acrylic paint bottle about 8 times. |
 |
| Step #2 Use wire cutters or scissors to cut wire leaving a 3″ tail. |
 |
| Step #3 Keeping your thumb firmly on wound wire, gently slip it off the end of the bottle and pinch to keep the ringed shape. |
 |
| Step #4 Carefully wrap the tail ends of the wire around rings. Don’t pull too hard, it looks better if it’s slightly loose. Use the needle nose pliers to wrap ends in securely and, if you like, form a small loop at the top to hang wreath from. |
  |
| Step #5 Your wreath should now look like the picture below. If you desire, you can cut additional lengths of wire to wrap around the rings. |  |
| Step #6 Put a dab of the Burnt Umber acrylic paint onto the plastic coffee can lid. Using the sponge brush, gently sponge the paint onto the wreath. I found it easier to hold the wreath still when I used a toothpick to anchor it. Let the paint dry and repeat one more time or until the original color of the wire is no longer showing. When the second coat of paint is dry, you can decorate it with dried flowers, ribbon or whatever you like. |
 |
In real life grapevine wreaths come in many shapes and sizes. Experiment by wrapping the wire around nail polish bottles, pieces of square wood etc. You can easily shape the wire into oval or heart shapes by gently bending it with your fingers. The possibilities are endless! |
|
|
Many thanks to our friend Michelle from Butterfly Dreams Miniatures for this tutorial.
Please note that this tutorial has been provided for your personal use. Distributing or selling this information without the consent of the author is a violation of copyright. |